The generator is fully automatic and controlled by a touch screen display. The PLC has three levels of access. User access which can be controlled by the end user, technician access that should only be used by the commissioning or maintenance technician and factory settings which may only be altered by DCW staff. Any attempt to access or alter factory settings will result in the voiding of warranties.
On commissioning the technician will train the end user in the correct operation of the generator and an operations manual will be left with the machine. It is recommended that at least two people are trained in this manner. |
|
If you have opted for remote system monitoring it will be necessary to select the PC you are intending to use and download and commission the software.
Once the machine is commissioned it is only necessary to keep the brine tank topped up with salt. The frequency of this filling is determined by the amount of disinfectants produced our technician will advise you of how often you will need to do this. Should the brine tank become empty the generator will cease to function and the system status beacon on the top of the machine will turn red. Prior to this the beacon will turn amber to indicate that the salt level in the brine tank is too low. |
|
Despite the built in water softener the generator cell will over a period of time become coated in limescale which will reduce the performance of the generator cell. This is dealt with by an automatic flushing system which at regular periods will flush the cell with a limescale remover. The machine comes complete with a 5 liter container of our limescale remover but when this becomes empty the display screen and the status beacon will alert you to change this. It is important that only our limescale remover is used as others may damage the generator cell and void the warranty. |
